Rubber-coated rollers for roughing and finishing sports footwear
The quality of a roughing process depends not only on the abrasive belt or machine, but also on the rubber roller, which determines the pressure applied to the abrasive, how closely the belt follows the sole’s profile , and whether the piece advances smoothly or jerkily. Roller wear makes the roughing process uneven, reduces adhesion between the sole and upper, and can cause problems with ungluing.
We produce coatings specifically designed for belt carding machines and finishing lines in sports footwear factories, choosing the compound, hardness, and surface finish based on the customer’s needs and the roller’s function in the machine.
The hardness of the compound depends on various factors, including the belt grit, the working speed, and the material: a soft solution is ideal for finishing and satin-finishing the edge of midsoles, for shaped profiles, and for light removal; an intermediate hardness covers the general roughing of soles and uppers before gluing; a higher hardness is optimal when the processing becomes faster and more aggressive, even if the roller loses its ability to follow the shapes.
Considering abrasive dust, primer and adhesive residue, and the heat generated by friction, we can provide compounds optimized for these stresses and improve roller life.
Press is the compound we recommend for most contact and drive rollers because it resists oils, plasticizers, and the solvents from primers and adhesives that inevitably end up on the rollers in gluing shops, and offers a good compromise between abrasion resistance and grip.
The Twoss it’s the mix Ideal for drive and pressure rollers that need to hold soles and components without marking them; it provides superior grip, however, it is not recommended where there is contact with oils, solvents, or primer residues, which will quickly degrade it.
The most common signs that indicate the need to re-coat the rollers are:
- vibration marks or lines on the carded surface indicating uneven carding
- shiny, hardened rubber or with small surface cracks, up to small detachments from the core;
- pieces that slip or move forward in jerks.
Intervening at the right time costs little; waiting, however, means paying for the worn roller in defects and not just in machine time.
You might be interested
Request a quotation
id prod->9889
nome prod->Rubber-coated rollers for roughing and finishing sports footwear
id prod->9889
nome prod->Rubber-coated rollers for roughing and finishing sports footwear





